Enduro CheckPoint Two 2.2
Continue to app
Paid Version
Publisher Description
There are two similar apps from this developer
- 'Enduro CheckPoint' requires external odometer
- 'Enduro CheckPoint Two' uses GPS or Bluetooth (odometer not required)
Enduro CheckPoint Two Features-
Constant display of -
- Mileage
- On-Time, Early, Late indication is seconds
- Next Possible Check Mileage
- Current route sheet average speed
- Next Reset or Free Time
- Seconds on check point clock
- (new) Actual speed
Visual warning when within 20 seconds of upcoming check
'GO' indicator whenever safe to move forward
Automatic mileage advance at resets
Reset Countdown timer
Free Time Countdown timer
Selectable GPS or Bluetooth mileage input
Selectable audio (beep) indication of on-time and early
Swipe left or right to adjust mileage in one tenth mile increments
Three mile clear ahead rider input after check point
Setup -
The app opens to the setup screen
Rider inputs race data -
- Race Start time of day
- Key time, taken from system clock, can be adjusted to match clock at sign up
- Row Number
- If Bluetooth is used, rider also inputs wheel circumference
- Rider selects Bluetooth if desired
- Rider selects audio cues if desired
Speed Changes, Resets, Free Times
Separate input pages are used to input all timekeeping feature of the race from the club's route sheet.
Rider inputs every speed change, reset and free time.
(new) Reset to Zero:
In resets, enter the reset (example) from 32 to 0
In 'speeds' and 'freetime' enter ' 000 0' one one line to separate entries associated with different loops
Operation
Once all data has been input, Rider clicks on 'GO' tab
Prior to start time, the app will countdown to start time.
When start time arrives, app begins timekeeping automatically.
While on time (within rider minute) display will indicate 'on-time', and display a numeric value
1 - 59 of seconds into riders minute
While on time rider will hear (optionally) a single beep every three seconds.
When Early (more than 59 seconds ahead of ideal time) display will indicate 'early', and display a numeric value
in minutes:seconds of time early
When early rider will hear (optionally) a double beep every three seconds.
When Late (more than 60 seconds behind ideal time, display will indicate 'late', and display a numeric value
in minutes:seconds of time late. When late, there is no audio cue.
When On-Time, this portion of the display is green text
When Early, this portion of the display is lght blue text
When On-Time, this portion of the display is yellow text
Whenever it is safe to proceed (not early, not in reset,free time, or approaching possible) 'GO' is displayed in green in upper left
As a check is approached, a yellow warning appears in upper left ex: 'Check 12.4'
As a check is approached the 'Check Time Seconds' display changes to yellow, as it counts up to the '0' check entry time.
When check entry time arrives, yellow 'Check 12.4' changes to green 'GO', and a burst of beeps indicates safe to enter.
When Late, the check advisory does not appear, and 'GO' remains in display.
When riding on time and a reset or free time mileage is reached, The upper left display will show time remaining at that way-point.
Free time and reset countdowns are not displayed when late or early.
Mileage can be corrected in 0.1 mile increments with a single swipe of the screen.
Each swipe to the right adds .01, each swipe to the left subtracts 0.1.
At a check point or gas stop, the next three miles can be cleared of possibles display with a triple tap on the screen.
If done in error, use a second triple tap.
more info http://www.fpcbaseball.com/checkpointtwo
Apr 17, 2024
Version 2.2
Version 2.2 adds capability to use a handlebar mounted audio remote control device to advance mileage and for brand-x riders, advance row number.
- press next / previous to increase / decrease mileage
- press play / pause to enter row change mode , then press next / previous to change row. Press play pause again to exit row change mode.
- press + / - to change volume of beeps used to tell rider when on time or early.
Without a audio remote control device, brand-x riders will still need to use setup screen to change row number
If audio remote control device is used once, on screen swipe to advance mileage will be deactivated. This will eliminate any possibility of rain/wet screen causing unwanted mileage advances.
When selecting a 'audio clicker' device be sure to select a waterproof model. Inexpensive models work fine. BlueTooth pairing is required on some models.
Search Amazon 'waterproof Bluetooth media button'. No need to spend more than about USD $20
About Enduro CheckPoint Two
Enduro CheckPoint Two is a paid app for iOS published in the Health & Nutrition list of apps, part of Home & Hobby.
The company that develops Enduro CheckPoint Two is John Day. The latest version released by its developer is 2.2.
To install Enduro CheckPoint Two on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2024-04-17 and was downloaded 1 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Enduro CheckPoint Two as malware if the download link is broken.
How to install Enduro CheckPoint Two on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Enduro CheckPoint Two is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Enduro CheckPoint Two is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
